Two years ago, the Typ 64 body getting its final work. Rear decklid, hinge, frame and skin was time consuming.😎 --------------------------------------------------------- VW60K10/Porsche Typ64/Berlin - Rome wagen - 38/43 Mathé recreation Some updates on the built of the VW60K10/Typ64 car. Have been working on the wheel covers/spats with good fit and also making the fastners, took a lot of time but it was worth it. We have also worked on the engine lid with frame, skin and hinges. Hinge geometry was a challenge, very sensitive to bind if you don´t get the angles correct. The hinges was TIG welded and it all seems to work fine now. Also very tight with space around the left side air cleaner, the Mathé car has cut the cleaners in order to get them to fit, we will try to avoid this little design flaw. Next up is to fit the engine lid skin to the frame and get a nice gap of 3.5 mm all around, this will take some time, but front lid and doors are done so we know the drill. After that the plan is to design and built the seats, steel tube frame with aluminum cover.